Wall Mounted SwimSuit Spining Dryer Water Extractor Development

Commercial Wall-mounted Swimsuit Spin Dryer/Water Extractor for use in public swimming pools, aquatic centres, gyms, hotels and spas.

Function Introduction:

The type of machine can operate similarly to the commercial “Next Generation” swimsuit dryer, removing most of the water from one swimsuit in approximately 8–10 seconds.

Could you please provide the following information:

• Price for 1 sample unit
• Pricing for 5, 10, 25 and 50 units
• MOQ
• Voltage : 230–240V Frequncy: 50Hz;
• European TUV Plug;
• Motor power and RPM;
• Average operating cycle time
• Approximate percentage of water removed per cycle
• Wall-mounted installation option
• Direct drainage connection
• Materials used, particularly parts exposed to chlorinated water
• Lid safety interlock and emergency/safety braking system
• IP rating
• CE, CB, SAA, RCM/EESS or other electrical certifications available
• Copies of electrical test reports and certificates
• OEM/private label availability
• Custom logo and custom colour options
• Product dimensions, net weight and packed dimensions/weight
• Warranty and spare-parts availability
• Production lead time
• HS tariff code

 Commercial Swimsuit Water Extractor which is not a washing machine. It would mainly be installed in swimming pools, aquatic centres, gyms and changing rooms near the beach.

At this stage, the preliminary requirements are:

Wall-mounted or very compact commercial design; spin/extraction only, no washing or heating; approximately one adult swimsuit per cycle; approximately 10–20 seconds per cycle; stainless-steel perforated inner basket, preferably SUS304; very low vibration and noise; automatic braking and lid/door safety interlock; direct drainage; 220–240 V / 50 Hz; moisture-resistant construction suitable for swimming-pool changing rooms; easy access for servicing and replacement of motor, bearings, brake and electronic components; and OEM branding/custom exterior design.

Preparation before This Project Formally Start:

A. Technical Feasibility Analysis  – recommended basket diameter, motor type, RPM, approximate extraction performance and proposed anti-vibration system;

B. Development cost Evaluation – estimated engineering/NRE cost, tooling cost if required, prototype cost and prototype lead time;

C. Production pricing – indicative FOB Ningbo price for 10, 25, 50, 100 and 500 units, together with MOQ;

D. Compliance Certification– Arrange independent laboratory testing for the applicable IEC / AS/NZS 60335.1 and spin-extractor requirements such as IEC / AS/NZS 60335.2.4, including a complete CB/test report;

E. Existing documentation – Prepare the copies of the CB/CE test reports or certificates for one of existing spin-dryer products, together with the laboratory name;

F. Commercial Support – standard warranty, spare-parts availability and whether motors, bearings, brake components and control boards can be supplied separately.